$14,500.00 – $15,999.00
This is the Riga XL 7 Greenhouse kit.
Add to any Riga XL for a complete starter package. Includes Riga XL 6 or 9 top and bottom shelf, 3 sets of professional LED grow lights, 24″ intake shutter vent, 20″ exhaust fan, thermostat to control vent and fan, 17,500 BTU 220 volt heater, 5 heavy duty seed trays, 10 stainless steel hooks and 10 plastic hooks. Also includes the facilitation kit.
Riga XL Pro Accessory Package - Riga XL 6
19.5″ W x 21″ L (each side) x 1.75″ in the middle
Wheelbarrow Access Plate
Top shelf 10″ wide and 19′ 8″ long.
Top Shelf Riga XL
Bottom shelf is 14′ long and 25″ deep.
Bottom Shelf Riga XL
The Riga XL Assembly Facilitation Kit contains all the tools and supplies you need for a smooth installation of your Riga XL greenhouse. The kit includes 25′ metric tape, a 10mm socket wrench, a 10 mm open wrench, two 20′ J-hook ratchet straps, four window restraint cables, two tubes of Boss 399 silicone caulk, and a permanent marker.
Assembly Facilitation Kit
An extra panel can be placed about the door of the Riga so that it drops down by 20 inches. This allows for the greenhouse to be built upon a stem wall (knee wall) foundation. A stem wall provides a solid base to build upon, raises the peak height
Riga XL Drop Down Door Kit
These polypropylene black seeds trays are made in Germany and are perfect for starting seeds in your greenhouse. They are each 24 inches long x 16 inches wide x 3.5 inches deep.
Heavy Duty Seed Tray
The Illumitex Eclipse GEN2 N Bar LED Grow Light Fixture F3 Spectrum comes either with a 9-foot long power cord or without one so that multiple fixtures can be daisy chained together. Each fixture is 4′ long with 12 LEDS and is designed to be installed between 12 inches and 36 inches above the plant canopy. It features 0-10 volt dimming, is damp-rated and dust-resistant, and has a 5 year warranty. The fixture with the plug can be daisy chained and the fixture without a plug includes a 2-foot long cord for daisy chaining.
With Power Cord
No plug - to be daisy chained
The misting system offers a convenient way to keep your plants hydrated while lowering the inside temperature of your greenhouse on hot days. The standard system is 14′ long and will work for a 20′ section of greenhouse, though it can be cut down for use in smaller greenhouses. the kit includes 5 misters and ships in 2 pieces with a connector.
The moveable plastic hooks come in sets of ten. These snap into the aluminum frame profile and are used for helping orient growing plants such as tomatoes or string beans.
Plastic Hooks (set of 10)
This electric heater generates 13,000 BTU using a 220V connection and is sufficient to keep the Riga heated on cold days.
Big Red Heater
This ventilation system uses a 20 inch exhaust fan with a thermostat to help keep your greenhouse properly ventilated on warm days. The exhaust vent runs on a 110V connection at 3400 CFM and the single speed thermostat runs on either 115V or 230V at 10 amps and 60 hertz.
12" Exhaust Fan
16" Exhaust Fan
20" Exhaust Fan
Intake Shutter Vent (for use with Exhaust Fan) allows controlled airflow through greenhouse.
16" In-take Fan
20" In-take Fan
24" In-take Fan
The solar light includes an external solar panel and battery pack with an internal light system to provide plenty of light for working in your greenhouse at night.
These are perfect for holding lights or flower baskets and other hanging plants.
Adjustable Hooks (set of 10)
Though this Riga greenhouse already includes a sufficient number of windows, extra roof windows are available to provide even more ventilation. Each window is 40 inches x 24 inches and includes an automatic opener. This opener does not require electricity as it has a special paraffin oil cylinder which expands and contracts based on the temperature. The temperature range on the automatic opener is adjustable.
Additional Riga Roof Window
RIGA Automatic Window Opener with quick release “arm” – allows the opener to be disconnected in adverse weather conditions.
Riga Auto Window Opener
The roof window restraint system for each window includes two 15 inch stainless steel cables with nuts and bolts. They are recommended for customers who live in high wind areas to help prevent sudden gusts of wind from damaging your roof windows
Roof Window Wind Restraint
This Riga greenhouse already includes enough sash-locks to keep the included roof windows and top halves of the Dutch doors completely shut during inclement weather. Extra sash-locks are available if extra roof windows are purchased or if customers want some extra just as backups.
Tube of Boss 399 silicone caulk
The base kit used when the Riga greenhouse is assembled directly onto the earth without the use of any concrete or pressure-treated wood foundation. It is made of reinforced aluminum for added durability and ensures that the frame is perfectly square. The lip of the base is actually meant to be placed in the ground, and the base kit is not needed when the greenhouse is already being anchored to a wood or concrete base.
Riga XL 8 Foundation Kit
Email (Your email address will not be published.) *