Riga 3s (8 x 11)


This is for the RIGA 3s Greenhouse: Size: 7’8″ W x 10’6″ L x 7’1″ H.

Product Documents


Select Options

Step 1 - Wheelbarrow Access Plate

19.5″ W x 21″ L (each side) x 1.75″ in the middle

Wheelbarrow Access Plate

Step 2 - Assembly Facilitation Kit

The Riga XL Assembly Facilitation Kit contains all the tools and supplies you need for a smooth installation of your Riga XL greenhouse. The kit includes 25′ metric tape, a 10mm socket wrench, a 10 mm open wrench, two 20′ J-hook ratchet straps, four window restraint cables, two tubes of Boss 399 silicone caulk, and a permanent marker.

Assembly Facilitation Kit

Step 3 - LED Grow Light

The Illumitex Eclipse GEN2 N Bar LED Grow Light Fixture F3 Spectrum comes either with a 9-foot long power cord or without one so that multiple fixtures can be daisy chained together. Each fixture is 4′ long with 12 LEDS and is designed to be installed between 12 inches and 36 inches above the plant canopy. It features 0-10 volt dimming, is damp-rated and dust-resistant, and has a 5 year warranty. The fixture with the plug can be daisy chained and the fixture without a plug includes a 2-foot long cord for daisy chaining.

With Power Cord

No plug - to be daisy chained

Step 4 - Misting System

The misting system offers a convenient way to keep your plants hydrated while lowering the inside temperature of your greenhouse on hot days. The standard system is 14′ long and will work for a 20′ section of greenhouse, though it can be cut down for use in smaller greenhouses. the kit includes 5 misters and ships in 2 pieces with a connector.

Misting System

Step 5 - Plastic Hooks (set of 10)

The moveable plastic hooks come in sets of ten. These snap into the aluminum frame profile and are used for helping orient growing plants such as tomatoes or string beans.

Plastic Hooks (set of 10)

Step 6 - Solar Light

The solar light includes an external solar panel and battery pack with an internal light system to provide plenty of light for working in your greenhouse at night.

Solar Light

Step 7 - Adjustable Hooks (set of 10)

These are perfect for holding lights or flower baskets and other hanging plants.

Adjustable Hooks (set of 10)

Step 8 - Additional Riga Roof Window

Though this Riga greenhouse already includes a sufficient number of windows, extra roof windows are available to provide even more ventilation. Each window is 40 inches x 24 inches and includes an automatic opener. This opener does not require electricity as it has a special paraffin oil cylinder which expands and contracts based on the temperature. The temperature range on the automatic opener is adjustable.

Additional Riga Roof Window

Step 9 - Riga Auto Window Opener

RIGA Automatic Window Opener with quick release “arm” – allows the opener to be disconnected in adverse weather conditions.

Riga Auto Window Opener

Step 10 - Roof Window Wind Restraint

The roof window restraint system for each window includes two 15 inch stainless steel cables with nuts and bolts. They are recommended for customers who live in high wind areas to help prevent sudden gusts of wind from damaging your roof windows

Roof Window Wind Restraint

Step 11 - Sash Lock

This Riga greenhouse already includes enough sash-locks to keep the included roof windows and top halves of the Dutch doors completely shut during inclement weather. Extra sash-locks are available if extra roof windows are purchased or if customers want some extra just as backups.

Sash Lock

Step 12 - Milkhouse Heater

  • 1500 watt
  • 110 volt

Milkhouse Heater

Step 13 - Silicone

Tube of Boss 399 silicone caulk


Step 14 - Riga s Door Drop Kit

To raise greenhouse 20″ to set on stem wall.

Riga s Door Drop Kit

Step 15 - Riga 3s Foundation Frame

The base kit used when the Riga greenhouse is assembled directly onto the earth without the use of any concrete or pressure-treated wood foundation. It is made of reinforced aluminum for added durability and ensures that the frame is perfectly square. The lip of the base is actually meant to be placed in the ground, and the base kit is not needed when the greenhouse is already being anchored to a wood or concrete base.

Riga 3s Foundation Frame

Step 16 - Riga 3/3s Top Shelf

Top shelf is 10″ W x 10′ 4″

Riga 3/3s Top Shelf

Step 17 - Riga 3/3s Bottom Shelf

Bottom shelf is 25″ W x 10′ 4″ L

Riga 3/3s Bottom Shelf

SKU: EX-RIGA3s Category:

Order now!   1-800-987-4337

Riga s Series

The Riga S-Series Greenhouses are designed to grow fresh vegetables, herbs, and flowers year round. Other greenhouses use less than 8 mm twin-wall polycarbonate panels and are considered to be season extenders, to be used when a night frost might be expected during the spring or fall season. The Riga greenhouses are designed, engineered, and manufactured in Germany by Hoklartherm, a leading manufacturer of commercial and hobby greenhouses, with 28 years experience. The Riga S-Series Greenhouse has 8 mm and 10 mm panels and can be placed on a 20″ stem wall if desired. A door drop down kit is an available option if you do this.

Riga 3s

With a combination of strong materials and durable hardware, the Riga 3s Greenhouse is by far the strongest greenhouses under $5,000. The polycarbonate glazing on the Riga Greenhouse is German made and believed to be of superior quality than the much more common Polygal or GE glazing. And a major advantage of the Riga S-Series Greenhouse Kit’s construction method is that the frame profiles are permanently attached to each other, and won’t come loose over time due to wind pressures.

The Riga 3s includes a large roof window which has an automatic opener to help keep the interior well-ventilated and at a comfortable temperature. The lockable, Dutch door provides easy access and is designed for quick installation.

The commercial-grade 8mm twin-wall polycarbonate panels on the sides and 10mm twin-wall polycarbonate panels on the front and back provide tremendous insulative value. They are extremely durable and are virtually unbreakable and provide much more efficiency than typical greenhouse panels. Gutters are not needed as the Riga’s unique design naturally diverts water away from the foundation.

Specifications and Features:

  • Exterior dimensions: 7′ 8″ W x 10′ 6″  L x 7′ 2″ H
  • Color: anodized aluminum
  • Floor space: 81 sq. ft.
  • 1 roof window: large 40″ W x 24″ L vent with temperature-adjustable, electricity-free automatic opener
  • 1 rear window is 30″ width x 42″ height with an adjustment arm
  • 8mm twin-wall polycarbonate panels on sides and 10mm twin-wall polycarbonate panels in front and back are UV-protected, have a R-value of 1.61 and 1.89, and are virtually unbreakable
  • Heavy duty aluminum frame is greatly sloped with a high peak to allow rain and snow to easily run off and can easily support the weight of an adult
  • Constructed so that the frame profiles are attached to each other in a manner that ensures that they will stay intact even in high winds
  • High ratio of paneling to frame width allows for maximum light transmittance
  • Heavy duty rubber seals are used on all windows, doors, and the top and bottom of the large side glazing panels for complete weather sealing
  • Dutch door includes keyed handle and is 30″ W x 72″ H
  • Tall peak height allows for plenty of working room inside the greenhouse without having to stoop and more room for shelving
  • Gutter and down spouts are not needed because of the unique frame design
  • Beautiful design to fit any garden
  • Includes 4 L-shaped anchor bars which attach to the inside of the frame base profiles to attach the greenhouse to a concrete or wood frame
  • Riga greenhouses have withstood all inclement weather when properly installed and anchored short of tornadoes and hurricanes
  • Includes comprehensive assembly manual along with a DVD showing each stage of assembly
  • Assembly usually takes just one weekend with two people (three is preferable) with ordinary household tools as there are no eaves and relatively few connections
  • Maintenance-free design means the Riga only needs occasional washing with a garden hose and recommended annual tightening of all nuts and bolts
  • The optional Foundation Frame is recommended when placing the greenhouse directly on the ground.
  • Friendly technical support available from Exaco for installation help 7 days a week

Be the first to leave a review